Click Here to Submit a Good Catch
⭐️
Click Here to Submit a Good Catch ⭐️
Health & Safety Entries
-
22.
Submitted by: Christopher Collins
Location: GA > Toccoa > 2344 Rock Quarry Cir Rd, Georgia
Situation: Unsafe Condition/Situation
Haul truck traveling with the bed up toward the power lines at the office. Work was stopped, issues were corrected, and the condition was reported.
-
21.
Submitted by: Chubby Horton
Location: NC > Sims > 7225 Neverson Rd, North Carolina
Situation: Unsafe Condition/Situation
The lifting eye was still in the motor on the scalping screen. The eye bolt was removed.
-
20.
Submitted by: Preston Bergeron on behalf of Tyler Purdy
Location: GA > Duluth > 3237 Satellite Blvd Bldg 300 Ste 210, Georgia
Situation: General Safety Concern
Tyler noticed two customer drivers outside their trucks talking while waiting to be loaded. He immediately informed management of this, and management corrected the issue. Plant Manager approached the drivers and informed them that they were not permitted to be outside of their vehicles while in the yard.
-
19.
Submitted by: Don Richards
Location: GA > Duluth> 3237 Satellite Blvd Bldg 300 Ste 210, Georgia
Situation: Excellence in Safety Practice/Procedure
Site converted to hats with built-in face shields and glasses when doing wash-out.
Recognizing: Matt Bowen
-
18.
Submitted by: Bill Owens
Location: SC > Georgetown > 661 Steam Plant Dr, South Carolina
Situation: Excellence in Safety Practice/Procedure
During Safety Week presentations, the manager used the Pixaera hazard recognition training modules. This created full engagement from the group.
Recognizing: Josh Ignozzi
-
17.
Submitted by: Christopher Collins on behalf of Jordan Wilson
Location: GA > Admin & Other
Situation: General Safety Concern
Building was using old screen bolts that need to be disposed of before an employee receives a laceration. Replaced the old screen bolts with new.
-
16.
Submitted by: Preston Bergeron on behalf of Tyler Purdee, Max Sanders, and Jordan Wilson
Location: GA > Duluth > 3237 Satellite Blvd Bldg 300 Ste 210, Georgia
Situation: General Safety Concern
While Chris Collins and Lec Overacker were walking the plant, Tyler noticed that Lec was not wearing any hi-vis clothing. Tyler Purdee, Max Sanders, Jordan Wilson respectfully asked Lec to put on his vest to correct the issue.
-
15.
Submitted by: Don Richards on behalf of Corey Sheriff
Location: GA > Duluth > 3237 Satellite Blvd Bldg 300 Ste 210, Georgia
Situation: Excellence in Safety Practice/Procedure
WAH retrieval system from 3M. 150’ to allow for any retrieval at plant of even high wall for a driller.
Recognizing: Cory Sherriff
-
14.
Submitted by: Jake Horton on behalf of Derrick Louallen
Location: SC > Jefferson > 341 Becker Minerals Ln, South Carolina
Situation: Excellence in Safety Practice/Procedure
While operating the secondary plant at first light, the operator noticed smoke coming from the back of one of the main transformers feeding the MCC. Management was notified immediately, and the area was blocked off. The local power cooperative arrived within 30 minutes; they replaced the burned wires, and operations resumed. The plant has segregated the parking area with concrete barriers.
-
13.
Submitted by: Bill Owens
Location: AL > Leeds > 8401 2nd Ave SE, Alabama
Situation: Excellence in Safety Practice/Procedure
The previous parking area for visitors and contractors allowed for interaction with plant equipment. The plant has segregated the parking area with concrete barriers. There is now a sidewalk from the parking area to the admin building, providing safe pedestrian travel.
Recognizing: Daniel Shaddix and Kevin Lang
-
12.
Submitted by: Kyle Seagraves on behalf of Jimmy Hulsey
Location: AL > Attalla > 1229 Valley Drive, Alabama
Situation: Unsafe Condition/Situation
A six-foot-deep sinkhole developed between the pump house and the aerosol electrical room. The issue was brought to the Plant Manager's attention, and rock was ordered to fill in the hole. -
11.
Submitted by: Scott Dickson
Location: NC > Raleigh > 5001 Duraleigh Rd, North Carolina
Situation: Unsafe Condition/Situation
Roller hanging in the air. Plant fixed at that moment.
-
10.
Submitted by: Bill Owens
Location: Clinton Portable Plant, SC
Situation: General Safety Concern
The plant manager requested a courtesy safety assessment for the new portable plant. Although all equipment is new, we identified opportunities to improve guarding. Proactive approach to maintaining a safe workplace. Guards to be extended.
-
9.
Submitted by: Jake Horton on behalf of Jordan Watts
Location: Jefferson, SC
Situation: Unsafe Condition / Situation
While gathering an extension at the Jefferson maintenance shop near the chain storage, a young rattlesnake was seen within inches of the contractor’s foot, hiding in the chains. The snake was removed from the work area, and all employees were informed to look around any work areas during warm months.
-
8.
Submitted by: Christopher Collins on behalf of Roy Pebbles
Location: Toccoa, GA
Situation: Excellence in Safety Practice / Procedure
Safety berm at the bottom of the Gab stockpile slope to prevent material sloughing onto the customer's truck driver.
Recognizing: Toccoa Team
-
7.
Submitted by: Matt Bowen
Location: Athens Quarry
Situation: Excellence in Safety Practice / Procedure
The overlook station was moved from beside the primary plant to the end of the pit. The new location reduces noise between the plant and neighboring properties and provides a safer viewing location.
Recognizing: Athens Team
-
6.
Submitted by: Preston Bergeron
Location: Toccoa, GA
Situation: Excellence in Safety Practice / Procedure
Added permanent parking wheel chocks to the office area.
Recognizing: Toccoa Team
-
5.
Submitted by: Scott Dickson
Location: Neverson, NC
Situation: Unsafe Condition / Situation
No labels on crusher panel MCCs in the MCC room. Labels are being applied today.
-
4.
Submitted by: Mack Erwin on behalf of Blayden Seeholtz
Location: Pelham Quarry, SC
Situation: Unsafe Condition / Situation
Employee noticed a bolt sticking in the front drive tire of the 773 haul truck and reported it to his supervisor. The bolt was removed without incident by a proper tire technician.
-
3.
Submitted by: Don Richards
Location: Sparta, GA
Situation: Excellence in Safety Practice / Procedure
After seeing their new water truck arrive with a hi-vis seat belt visible from the ground, Sparta's management team decided to add a similar reflective cover to all on-site vehicles to raise awareness and accountability. This is a great solution!
Recognizing: Sparta Management Team
-
2.
Submitted by: Scott Dickson
Location: Jefferson, SC
Situation: Excellence in Safety Practice/Procedure
Installation of HP500 lube unit inside a shipping container.
Environmental Entries
-
6.
Submitted by: Jordie Promislow & Kyle Hamilton
Location: NC > Moncure > 2220 Corinth Rd, North Carolina
Situation: Excellence in Environmental Practice/Procedure
A backup gas cooler was purchased and planned to be stored onsite in a laydown area at the Cape Fear STAR® site. This laydown area is directly beside a stormwater pond where analytical stormwater monitoring is performed. The site’s stormwater permit requires Total Suspended Solids, Chemical Oxygen Demand, Non-Polar Oil and Grease, Copper, Lead, and Zinc to be tested. It was found that the gas cooler is predominantly made of zinc and may leach zinc as it it exposed to stormwater which would increase the zinc level in the pond and cause the site to exceed their stormwater benchmarks.
The site covered the gas cooler to prevent stormwater exposure and zinc leaching from the equipment. This good catch prevents the site from potentially exceeding their benchmark limits and having to complete a Tier One Response to the State.
-
5.
Submitted by: Mack Erwin
Location: SC > Greer > 240 E Howell St, South Carolina
Situation: Excellence in Environmental Practice/Procedure
Bush hogged around the ponds and stormwater control areas.
-
4.
Submitted by: Mack Erwin
Location: Clinton Quarry
Situation: Unsafe Condition / Situation
Filters and an oil drum were left out after service was completed. Lopke supervisor was made aware and cleaned up the area.
-
3.
Submitted by: Mack Erwin
Location: Clinton Quarry
Situation: Unsafe Condition / Situation
Properly discard empty barrels and remove oil stains from the ground. The Lopke supervisor was made aware and cleaned up the area.
-
2.
Submitted by: Mack Erwin
Location: Clinton Quarry
Situation: Unsafe Condition / Situation
Waste oil drain barrel left half full of used oil and not marked. Spoke to the Lopke supervisor, and the barrel was picked up.
-
1.
Submitted by: Kayla Palacio
Location: Fayetteville, GA
Situation: Unsafe Condition / Situation
Flocculant totes are in the woods. Flocculant totes need to be moved.
Community Engagement Entries
-
8.
Submitted by: Tommy Granade
Location: TN>Harriman>71 Swan Pond Rd, Tennessee
Tennessee Department of Transportation’s Adopt‑A‑Highway
Situation: Community Engagement
Members of our Southeast Region sales team continued to make a meaningful impact through the Tennessee Department of Transportation’s Adopt‑A‑Highway Program. The team maintains a 2‑mile stretch of highway near Knoxville, TN, helping keep roadways cleaner, safer, and more welcoming for everyone who travels through the area.
-
7.
Submitted by: Blake Latham
Location: SC>Anderson>1413 Hayes Rd, South Carolina
Anderson Quarry
Situation: Community Engagement
The quarry hosted 20 Girl Scouts for an engaging, hands-on STEM experience focused on sustainability and environmental stewardship. The scouts planted nearly 300 trees, toured the quarry, enjoyed lunch, and participated in lessons on forestry, geology, and the aggregates industry. To cap off the day, they earned their STEM badges while gaining a deeper understanding of environmental responsibility and natural resource management.
-
6.
Submitted by: Christina Hartigan
Location: SC>Sumter>755 Industrial Road, South Carolina
Lemira Elementary School
Situation: Community Engagement
GRR participated in Lemira Elementary School's Career Day, introducing students to careers in environmental and laboratory operations. Through an engaging, educational presentation, students learned about lab processes and the important role pH testing plays in waste processing.
-
5.
Submitted by: Andy Ball
Location: SC>Lexington>219 Cedar Rd, South Carolina
Transitions Homeless Shelter, Columbia, SC
Situation: Community Engagement
Lexington employees have committed to a rotating schedule serving meals every other week during the lunch shift at Transitions Homeless Shelter in downtown Columbia. Each shift provides approximately 200 meals, bringing nourishment and hope to those in need.
-
4.
Submitted by: Kevin Lang
Location: AL>Leeds>8401 2nd Ave SE, Alabama
Leeds Outreach Fishing Tournament, Leeds, AL
Situation: Community Engagement
Heidelberg Materials hosted the Leeds Outreach Fishing Tournament, bringing together 27 boats and 54 fishermen for a day of friendly competition and community support. The event raised $6,400 for Leeds Outreach, with all boat entry fees directly benefiting the organization.
-
3.
Submitted by: Daren McMorris
Location: NC> Raleigh> 5001 Duraleigh Rd, North Carolina
Wake County Big Sweep
Situation: Community Engagement
The group continued its long-standing partnership with The Big Sweep, a program of the Wake Soil and Water Conservation District that protects local waterways. During the cleanup event, teams collected litter from Lake Crabtree and the surrounding watershed. Through equipment support, logistical coordination, and volunteer participation, the group helped improve the area's environmental health while demonstrating our ongoing commitment to sustainability and community stewardship.
-
2.
Submitted by: Samuel Edwards
Location: NC> Durham> 5013 Denfield St, North Carolina
Eno River Confluence Natural Area, Durham, NC
Situation: Community Engagement
The Durham, NC Aggregates Group partnered with the Eno River Association to support the 270-acre Confluence Natural Area by donating gravel screenings to improve access roads and parking areas. These enhancements help keep the natural area safe and accessible for visitors, volunteers, and community events.
-
1.
Submitted by: Kelly Tackett
Location: NC> Durham?5013 Denfield St, North Carolina
Eno River, Durham, NC
Situation: Community Engagement
The Eno River Association, Friends of the Mountains-to-Sea Trail, and Heidelberg Materials partnered for a volunteer cleanup along the Eno River between Stanley Road and Teer Quarry. The effort brought together 24 volunteers who removed approximately 45 cubic yards of debris, including discarded picnic tables, rollaway bins, and more than 20 large trash bags, while also treating over 50 invasive fig buttercup plants. The Durham Aggregates Group supported the event with site access, equipment, and meals.
Best Practice & Behavior Entries
-
7.
Submitted by: Christopher Allen
Location & Business: GA> Newnan > 37 Pine Rd, Georgia
Situation: Best Practice
Make sure mirrors are cleaned every day.
-
6.
Submitted by: Daren McMorris
Location: NC > Raleigh > 5001 Duraleigh Rd, North Carolina
Situation: Best Practice
Fall protection and arc flash suit storage hanging in lockers in a climate-controlled room.
Recognizing: Crabtree Team
-
5.
Submitted by: Daniel Carroll
Location & Business: Florida > Cape Canaveral > 575 Cargo Rd, Florida
Situation: Best Practice
While preparing to inspect the ball mill, the team demonstrated excellent safety practices by using a properly tied-off harness and ladder, maintaining three points of contact, wearing the appropriate PPE, and ensuring safe body positioning throughout the task. Their attention to safety helps protect everyone on site and sets a strong example for others to follow.
Recognizing: Andrew Boudriault, Daniel Carroll, and Sharod Nelson
-
4.
Submitted: Alex McArthur on behalf of Matt Bowen
Location: Athens, GA
Situation: Best Practice
Athens, like many sites, experiences significant employee turnover. Currently, 50% of the employees at Athens have less than two years of experience. New hires need time to become familiar with the plant, whether that’s the names of screens or crushers or the settings for a given operating mode. Labeling screens and crushers with their names, media opening/closing side settings, and the LOTOTO bucket in the MCC simplifies communication and helps prevent mistakes in plant setup or energy isolation for new hires.
Recognizing: Chris Worley
-
3.
Submitted by: Alex McArthur on behalf of Matt Bowen
Location: Athens, GA
Situation: Best Practice
An aggregates operation must set the close-side setting of its crushers each day before beginning production. The close side setting is measured by dropping three foil balls on different sides of the crusher cavity and measuring the smallest dimension of the resulting crushed foil pucks. It takes 5-10 minutes to create enough foil balls to perform this task each morning, potentially delaying plant start up.
Athens Quarry created a dedicated job box with rolls of foil and storage for foil balls which was placed next to the crushing platform. During the day, when an employee has free time, they can make up bunch of foil balls and store in the job box. This eliminates any wasted time in the morning looking for foil or creating new foil balls to check the crushers.
10 min per day x 240 days per year x 600 tph = 24k additional tons that could be produced, or alternatively 40 hours less operating time to meet demand.
Recognizing: Clint Reed
-
2.
Submitted by: Jami Rodgers
Location: Fly Ash Operations
Situation: Best Practice
Tommy Burbage has assembled a trailer with a variety of hands-on training simulations related to fly ash operations (flange alignment, butterfly installation, belt alignment, and bin vent and baghouse cleaning). These exercises and simulations allow him to train individuals on proper practices and equip them with the knowledge of how to approach a situation if something goes wrong. Future plans: install a television for presentation material to accompany training sessions and air conditioning for warmer months.
Recognizing: Tommy Burbage
-
1.
Submitted by: Tony Gianakis
Location: Habersham Quarry
Situation: Best Practice
Implemented a welded handle on the cone crusher bowl adjustment ring ram, eliminating pinch-point exposure and reducing the risk of finger injuries.
Recognizing: Scott Mixson